Scooter / maxi-scooter
CVT transmission and small wheels change the rules: no gearing swap, no chain, and the tyres matter more than on anything else.
Typically: 50–550 cc, belt/CVT, 10–15 inch wheels, underseat storage
Everything on this page, conditionally
This list shows every upgrade that can apply to the class, including the ones that only make sense in specific conditions — auxiliary fuel for remote riding, heated gear for cold, a lowering kit for a short rider. The planner filters them down to your riding; this page is the full menu.
Stage 1 — Before your next ride
Cheap, reversible, mostly hand tools. Do all of these before spending on anything in stage 2; several of them are free.
Set rider sag and preload for your weight
Suspension & handling$0–$40 · ~1 h to fitA tape measure, a helper and the preload adjusters the bike already has.
Bikes are sprung for a nominal 75–80 kg rider in nothing but leathers. Set sag first and half the complaints about a bike diving, wallowing or running out of travel go away for free — and you learn whether the springs are actually wrong before you buy any.
Check before you order
- — Static and rider sag targets from the service manual, not a forum
- — How much preload range is left before the adjuster bottoms out
- — Whether the shock has a remote hydraulic adjuster (loaded settings become a 10-second job)
Search for parts:Amazon
Tyres chosen for the surface you actually ride
Tyres, wheels & brakes$150–$500 · ~2 h to fitA tyre pair matched to your real road/dirt split, in the load and speed rating the bike needs.
The single biggest change you can make to how a bike steers, grips and stops, and the only upgrade you are forced to buy anyway. Most riders run a 50/50 tyre for a 90/10 life, or a sport tyre through a winter.
Check before you order
- — Load index and speed rating at least what the manual specifies, especially two-up
- — Tube or tubeless construction, and whether the rear is available in your size
- — Honest split: knobblies wear out in 3,000 km of tarmac and steer badly in the wet
Search for parts:Amazon
Wide footpegs, lowered pegs and adjustable levers
Ergonomics & comfort$70–$300 · ~2 h to fitWider, sharper-toothed footpegs, a lowering bracket where legroom is short, and span-adjustable brake and clutch levers.
Wide pegs stop your boot slipping and take the fatigue out of standing; 20 mm of peg drop opens up a cramped riding position more than a bar change; a lever you can actually reach with two fingers is a braking upgrade.
Check before you order
- — Lowered pegs move the brake pedal and shifter too — both need re-setting
- — Cornering clearance on a road bike: pegs that hang lower touch down earlier
- — Folding pegs with a proper stop, so they do not fold under your boot
Search for parts:Amazon
Screen or windshield change
Ergonomics & comfort$60–$350 · ~1 h to fitA taller, shorter or differently shaped screen, or a spoiler lip added to the stock one.
Helmet buffeting is a geometry problem: the top edge needs to sit either well below your line of sight or above your helmet, never in between. Getting it right removes the noise and the neck ache; getting it wrong is worse than no screen at all.
Trade-off: A taller screen adds heat behind it in summer and catches crosswinds.
Check before you order
- — Your seated helmet height, which is why a screen that suits one rider fails another
- — An adjustable bracket or a bolt-on lip is a cheaper first experiment than a new screen
Search for parts:Amazon
Heated grips
Ergonomics & comfort$60–$200 · ~2 h to fitBonded grips or under-grip elements with a switched controller, wired to a fused, ignition-switched feed.
Cold hands are a safety problem before they are a comfort problem, and grips extend the riding year at both ends more cheaply than any garment.
Check before you order
- — Charging headroom at idle, especially with other accessories fitted
- — Grip diameter and whether bar guards still fit over the elements
- — A controller with a low-voltage cut-out, so it cannot flatten the battery
Search for parts:Amazon
Rack plus soft luggage
Luggage & load carrying$200–$900 · ~2 h to fitA tail rack or pannier frames carrying dry bags and soft throw-overs, strapped rather than latched.
Lighter and cheaper than hard cases, does not break your leg in a fall, and a torn bag is repairable with tape. Off-road it is the right answer at almost any budget.
Check before you order
- — Subframe load rating — the number the manual gives, not what the rack can hold
- — Heat shielding between bags and exhaust or pipe
- — Bags must not touch the tyre when the suspension compresses fully
Search for parts:Amazon
Tank bag and cockpit storage
Luggage & load carrying$60–$250 · ~1 h to fitA magnetic, strap or lock-ring tank bag, plus a small bar or fork bag for what you need while moving.
Documents, phone, snacks and a tyre gauge where you can reach them without stopping. Weight this far forward barely affects handling.
Check before you order
- — Plastic or alloy tanks need straps or a lock ring, not magnets
- — It must not block the bars at full lock or your view of the dash
Search for parts:Amazon
Auxiliary fuel cans or bladder
Fuel range$40–$200 · ~1 h to fitA 5–10 litre bladder or approved can, mounted low and carried only on the legs that need it.
One tenth the price of a big tank, carried only when the next fuel is 400 km away, and the bike handles normally the rest of the year.
Check before you order
- — Mount it low and never on the pillion seat if you can avoid it
- — Bladders must be an approved fuel type and protected from abrasion
- — Airline and ferry rules on carrying empty fuel containers
Search for parts:Amazon
Brake-light modulator and rear conspicuity
Lighting & visibility$30–$150 · ~1 h to fitAn LED tail-light or modulator that flashes briefly on braking, plus reflective tape on the panniers, rims and fork.
Being rear-ended in traffic is a top-three urban crash, and the cheapest countermeasure on the whole bike is a light that gets noticed and tape that gets seen in a headlight.
Check before you order
- — Modulator legality varies by market — some allow flashing only above a certain rate
- — LED tail lights can confuse older bulb-monitor circuits
Search for parts:Amazon
Louder horn
Lighting & visibility$25–$120 · ~1 h to fitA twin-tone or air horn on a relay, so the current is not going through the stock switch.
The stock horn on most bikes cannot be heard inside a car with the windows up. It is $40 to fix that.
Check before you order
- — Mounting point with airflow and no water trap
- — Relay it: the stock wiring cannot carry an air horn
Search for parts:Amazon
Fused accessory block with USB
Electrics & charging$30–$180 · ~3 h to fitA small fuse block fed from the battery through a relay triggered by an ignition-switched circuit, with USB and a powerlet outlet.
One place to hang lights, heated kit, a GPS and a compressor, each individually fused, nothing draining the battery with the key out, and no more spliced-into-the-tail-light wiring.
Check before you order
- — Total accessory draw against what the alternator makes at idle
- — A dry mounting spot with strain-relieved wiring away from the steering head
- — Trigger the relay from a low-current circuit, not the headlight feed
Search for parts:Amazon
Voltmeter and a tender lead
Electrics & charging$20–$90 · ~1 h to fitA dash or bar voltmeter, plus a permanently fitted pigtail for a smart charger.
A charging fault shows up as a falling voltage days before it strands you, and a bike that lives outside stays healthy on a tender for the price of one battery.
Check before you order
- — Pigtail routed where you can reach it without removing bodywork
- — Fused at the battery end
Search for parts:Amazon
Navigation mount and powered cradle
Electrics & charging$40–$200 · ~1 h to fitA vibration-damped mount on the bar clamp or a frame bracket, with a switched, fused power lead.
Phones die from vibration on a bar clamp, and a phone on a dying battery is a navigation failure at the worst moment.
Check before you order
- — Mount off the bar clamp or a solid bracket, not mid-bar, and damped on a single-cylinder bike
- — It must not obstruct the dash or the bars at full lock
Search for parts:Amazon
Fastener audit and thread-lock
Reliability & longevity$10–$80 · ~3 h to fitA torque wrench, the manual's torque table, medium-strength thread-lock and an evening.
Half of all roadside failures are something that vibrated loose: subframe bolts, sprocket nuts, bar clamps, exhaust flanges, spokes. It costs the price of a bottle of thread-lock.
Check before you order
- — The manual's torque figures, since alloy threads strip long before steel
- — Paint-mark critical fasteners so a loose one is visible at a glance
Search for parts:Amazon
Fluids and filters baseline
Reliability & longevity$60–$250 · ~3 h to fitEngine oil and filter, brake fluid, coolant, air filter and fuel filter, all replaced to a known date regardless of what the seller said.
On a used bike this is the cheapest way to reset the unknowns, and brake fluid and coolant are the two nobody ever changes.
Check before you order
- — Grades and quantities from the bike's own manual — never the brand default
- — Off-road bikes need a foam-filter service kit and a spare filter, not just a new one
Search for parts:Amazon
Buy the wear parts while they still exist
Reliability & longevity$100–$600A shelf-stock set of the parts that end a trip and are model-specific: levers, cables, filters, gaskets, a chain, bearings, and any plastic that is unique to your bike.
On an out-of-production model the constraint is supply, not money. The parts that are hard to find in five years are the cheap ones nobody stockpiled, and buying them now costs the same as buying them later — except they exist.
Check before you order
- — Cross-reference part numbers with the bikes your model shares parts with; the shared parts are the safe ones to buy later
- — Rubber and plastic have a shelf life — buy seals and hoses to use, not to hoard for a decade
Search for parts:Amazon
Air filter and intake service
Power & fuelling$30–$150 · ~1 h to fitA high-flow or correctly serviced filter, a clean airbox, and the snorkel or lid left alone unless the fuelling is being changed with it.
A clogged filter costs real power and economy, and on a dirt bike it is the difference between an engine that lasts 200 hours and one that lasts 60. Removing an airbox lid without touching the fuelling usually makes the bike worse, not faster.
Check before you order
- — Foam filters need oiling correctly; a dry foam filter passes dust straight through
- — Do not open up the intake unless the fuelling can be adjusted to match
Search for parts:Amazon
Stage 2 — The money upgrades
Where the bike actually changes character. Bigger spend, still a home-garage job on most bikes.
Sintered pads and braided lines
Tyres, wheels & brakes$80–$300 · ~2 h to fitPads to a spec chosen for the use, stainless braided hoses and fresh fluid.
Braided lines take the sponge out of a long front line, and fresh fluid does more than either. On a bike carrying luggage or a pillion the stock pad compound is usually the weak link, not the caliper.
Check before you order
- — Pad compound suits the disc: some sintered compounds chew cast-iron and older discs
- — Hose lengths for your bar and mudguard setup, and whether ABS lines are separate
- — Off-road: softer pads bite better cold and wet, but glaze under sustained downhill braking
Search for parts:Amazon
Taller seat, peg lowering and a bar riser stack
Ergonomics & comfort$200–$700 · ~3 h to fitThe three dimensions that make a bike fit a tall rider, changed together: a taller or re-foamed seat, brackets that drop the pegs 25–40 mm, and enough bar rise to stand the torso up.
A tall rider on a stock bike is folded up, which puts the weight on the tailbone and the knees into the tank. Changing one dimension alone usually makes it worse: a taller seat without lower pegs closes the knee angle further.
Trade-off: Every millimetre down at the pegs is a millimetre of ground clearance, and a taller seat makes the bike harder to hold at a stop.
Check before you order
- — Inseam and torso length, and which of the three actually pinches — knees, hips or shoulders
- — Lowered pegs cost cornering and off-road clearance, and move the brake and gear levers with them
- — Standing height changes reach to the bars and the screen line for wind
Search for parts:Amazon
Reshaped or aftermarket seat
Ergonomics & comfort$180–$600 · ~1 h to fitA wider, flatter foam of the right density — either a replacement seat or your own pan re-foamed and re-covered.
Numbness at 90 minutes is the most common reason a touring day ends early, and it is a foam-density problem, not a padding-thickness problem. Re-foaming your own pan also lets you take height out for a shorter inseam, or add it for a taller one.
Check before you order
- — Seat height change in both directions — say which way you want it
- — Off-road: a flat seat you can move around on beats a plush bucket that pins you in place
- — Heated seat elements need a switched, fused circuit
Search for parts:Amazon
Top box on a plate
Luggage & load carrying$200–$700 · ~1 h to fitA lockable 30–50 litre case on a mounting plate over a subframe-mounted rack.
Where a helmet and a shop run live, and the only luggage most commuters need.
Trade-off: Raises the centre of gravity at the worst possible point.
Check before you order
- — Rack load rating including the case's own weight
- — A big box far back is the classic cause of high-speed weave — keep the load light
Search for parts:Amazon
LED headlight bulb or unit
Lighting & visibility$80–$400 · ~1 h to fitA quality LED retrofit in the stock reflector, or a complete LED projector unit.
Older halogen units are the reason night riding feels like guessing. Done properly, this doubles usable light without touching the charging system.
Check before you order
- — Reflector geometry: a cheap LED in a halogen reflector scatters light and blinds oncoming traffic
- — Beam pattern must keep a legal cut-off in your market
- — Some bikes need a decoder to stop a bulb-out warning or flicker
Search for parts:Amazon
Better battery, or lithium
Electrics & charging$100–$450 · ~1 h to fitA quality AGM in the stock size, or a lithium-iron pack where weight matters, plus a matching charger.
Most no-start faults are a tired battery, and a lithium pack saves 2–4 kg on a dirt bike. AGM is the better answer for anything that sits in the cold.
Check before you order
- — Lithium needs a compatible charger and dislikes cold cranking — a bad choice for a winter commuter
- — Case size and terminal orientation in the stock tray, and vibration padding
- — Whether the bike's regulator is kind to lithium chemistry
Search for parts:Amazon
Wheel, linkage and steering bearings
Reliability & longevity$60–$300 · ~4 h to fitWheel bearings, linkage and swingarm bearings, steering-head races and the seals that keep water out of all of them.
Water-ingested bearings are the standard fate of a bike that gets washed and ridden in the wet, and they fail as vagueness in the handling long before they fail loudly.
Check before you order
- — Check before replacing: a dial gauge or a levered wheel tells you which are actually gone
- — Linkage bearings on a dirt bike need grease every season, not replacement
Search for parts:Amazon
Fuel pump, filter and injector service
Reliability & longevity$80–$400 · ~3 h to fitIn-tank filter and pump strainer, injector clean, and the tank breather and vent lines checked.
A blocked in-tank strainer is the classic cause of a bike that runs fine cold and dies hot, and a kinked tank breather will stop a bike dead and leave no trace.
Check before you order
- — Whether the filter is a serviceable part or comes only as a pump assembly
- — Ethanol-degraded hoses on anything over about ten years old
Search for parts:Amazon
Loom and connector service
Reliability & longevity$15–$120 · ~4 h to fitEvery connector opened, cleaned, greased with dielectric grease and re-seated, with chafe points taped and rerouted.
Intermittent electrical faults are almost always a green connector or a wire rubbed through on a frame tube, not a failed component. This is a free afternoon that prevents the hardest kind of roadside diagnosis.
Check before you order
- — Photograph the routing before you unplug anything
- — Sidestand, kill and neutral switches first — the usual suspects
Search for parts:Amazon
ECU flash or fuel controller
Power & fuelling$200–$800 · ~2 h to fitA remapped ECU, or an inline fuel controller and an O2 eliminator where flashing is not available.
Most modern bikes are lean and abrupt at small throttle openings to pass emissions tests. Fixing the fuelling removes the snatch and the surging — a bigger real-world gain than peak power.
Trade-off: Voids the powertrain warranty on most bikes and can fail an emissions inspection.
Check before you order
- — Whether your ECU can be flashed at all, or only piggybacked
- — Emissions legality and warranty in your market
- — A map matched to your exhaust and filter, not a generic file
Search for parts:Amazon
Exhaust plus matching fuelling
Power & fuelling$300–$1.4k · ~3 h to fitA slip-on or full system, fitted together with the fuelling change it requires.
The honest reasons are weight — a full system can save 5 kg high on the bike — and a cracked or rotten original. Power is a side effect and rarely the biggest one.
Trade-off: Noise, legality, warranty and resale, and a full system on a modern bike often needs an O2 workaround.
Check before you order
- — Noise limits and homologation stamps where you ride, and at track days
- — A slip-on without a fuelling change usually makes a lean bike leaner
- — Pannier and crash-bar clearance around a bigger can
Search for parts:Amazon
Stage 3 — Specialist
Workshop work, custom parts or irreversible modification. Worth it only once stages 1 and 2 are done and the bike is still the limit.
Charging system upgrade or service
Electrics & charging$150–$600 · ~3 h to fitA MOSFET regulator/rectifier, connector renewal, and a stator test — or a higher-output stator where one exists.
Older bikes with a shunt regulator cook their stators, and the failure is a roadside one. If you have added lights and heated kit, the charging system is now the limiting component.
Check before you order
- — Measure output before spending: a weak stator and a dead regulator look identical from the saddle
- — Connector quality is usually the real fault — the ring terminals and spades, not the parts
Search for parts:Amazon